• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost installers near me Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. This system is discreet & doesn't require additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This will then allow your vehicle to begin.

Simple PIN code change process

With the rising rate of vehicle theft, a lot of owners are looking how to become a ghost immobiliser installer improve their security. There are many types of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking system may assist you in locating your car if it is stolen however, it won't prevent the crime. An immobiliser, on the other hand does exactly what it says on the label: it shuts off the engine of your car so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your car.

Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered before the engine can start. This can be done via the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is a great option when you wish to donate your car to valet parking or for maintenance. The immobiliser will remain active.

The Ghost is a very unique and innovative device which works in conjunction with buttons in your vehicle rather than being a standalone device. This means that it's not just a powerful protection against theft of your vehicle, but it can also be transferred onto any other vehicles you have, making it more valuable than a traditional steering wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser Problems Immobiliser is a high-tech security system that protects your vehicle from key cloning and hacking. It also prevents ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices, which is the most common method used by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it operates silently compared to traditional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, the centre console, or doors, to create unique sequences for disarming. You can make this sequence up to 20 presses long to provide additional security. The iPhone app allows one, authorized connection using the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run when a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service for maintenance without having to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from running its normal start-up routine until you input a custom passcode. The system can be activated or deactivated through your smartphone's app without the need for wires.

The standard factory immobilisers function with a transponder which is integrated into the key. It transmits a message to the ECU. If the correct code is sent the car will start however, if the transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of car security systems technology has developed the Ghost immobiliser. It safeguards your car from hacking, key cloning and even key theft. Only by physically towing your vehicle away from thieves could they take it away and not be able to drive it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN code that is changeable that must be entered prior to you are able to use your car. This is done without additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves cannot use sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, lamborghini ghost installer is concealed within the vehicle, so it cannot be disabled or removed by thieves. It is more difficult to remove from a car alarm which requires disarming via a button sequence. This makes it a fantastic complement to a GPS tracking device which can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You don't need to look too far on social media to find stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.

The ghost installation near me immobiliser was designed to combat this, and give you an additional layer of security in order to protect your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered alongside your original key fob in order to prevent the engine from starting. The unique override pin can be found on the black card you will receive after installation. It's easy to remember as there are no LED indications.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, which means it cannot be recognized by thieves using diagnostic software that is able to identify the security system you have installed. This makes it a fantastic alternative to an alarm.

Contrary to most security systems that use an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely through an electronic block of commands to both the ECU and the engine.

They can also be connected to an analog alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also fully service/valet mode-compatible and a good alternative to a tracker if you are you are taking your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent times there has been a increase in vehicles that are stolen without owners' keys. With easy access to key cloning tools and door lock pick sets it is now much easier for thieves to take your pride and joy. We've developed the autowatch ghost immobiliser fitting Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been cloned.

It directly communicates with your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. A unique and changeable PIN code sequence up to 20 digits has to be entered before you can start your car.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being started or driven away if a PIN code isn't entered prior to. If you're driving away with the device armed it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you don't enter your PIN code at this point, the warning will continue to flash and require a new PIN code every attempt to start your car.