• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning, and stops thieves from driving the vehicle using original keys. Our most recent immobiliser connects to your vehicles data network via CAN and the unique PIN code needs to be entered for the engine to start.

Contrary to trackers Ghost does not transmit any radio frequency signals and can't be detected with diagnostic tools. Also, it doesn't have any LED indicators or buttons giving the impression that it is in your car or van.

Anti-key cloning

The Ghost immobiliser was designed to stop key cloning. The device is connected to your vehicle's data network CAN, and creates a unique pin code by using the factory buttons on your dashboard and steering. This stops the thief from being able to start your car. If the incorrect PIN is entered it will stop your engine from starting which makes it impossible to drive off with your pride and Joy.

A ghost immobiliser is a new technology that is extremely hard for thieves to defeat. Contrary to physical deterrents, such as wheel locks and steering locks which can be cut or taken The ghost immobiliser is a discreet electronic device that cannot be easily detected by regular thieves because it doesn't emit radio signals and works silently.

The next-generation immobiliser protects your vehicle from a range of threats, including key-hacking relay attacks, key-hacking, and duplicate copies. It also stops thieves from stealing keys or replacing your ECU because it won't permit them to start the car without first entering the correct PIN code.

The ghost immobiliser 2 unlike other immobilisers, it does not require a remote control or key fob to operate. It can be deactivated through an app on the driver's smartphone. This makes it ideal for those times when you need to hand your car over for valet parking or servicing without keys.

The Autowatch Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to make it as easy and convenient to use and yet be as secure as possible. This is achieved by integrating the Ghost-II into the vehicle's data network CAN, which means that there aren't any additional wires that can be hidden or easily found. It also has an integrated feature that allows you to disable your ghost tracker installation-II by connecting it to the vehicle's Bluetooth and you'll be able to enter and drive without any hassle.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves can gain access to your vehicle's OBD using an laptop, mobile app, and some cables that can be purchased online for less than PS50. Once they have access, they can do anything they want including resetting your vehicle's fault codes to tuning your car, or even stealing it in under a minute.

It can protect your vehicle from being stolen by requiring a unique PIN code to be entered in conjunction with your key fob prior to you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any RF scanning technology or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without requiring a PIN code.

You will also need an OBD cable that has OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You will also need an OBD cable that has OBD pins that are connected to the CAN bus, ghostinstallations (just click the following web page) these can be found on Amazon/Ebay for about PS50. Then, you need to splice the cable into the wiring harness of your car for example, the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they are able to send diagnostics to the system at a high baud rates, which will crash the car's CAN and stop the systems from working. This could cause the engine to stop and doors to lock, or even the brakes to be engaged.

No additional key fobs or remotes required.

An immobiliser for your car is a excellent piece of anti-theft technology that is used by millions of modern vehicles around the globe. Using engine ECU software to prevent vehicles from starting if a false transponder signal is sent to it, an aftermarket immobiliser is a great way to protect your vehicle.

However, it could be easy for a thief to circumvent an immobiliser system when they have access to the code to deactivate it. A thief could easily remove the battery from many key fobs by prying them open. They could then use an easy tool to remove the internal circuit board from an immobiliser and replace it with blank. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates with the vehicle's engine ECU (Engine Control Unit) via a discrete, silent data circuit in CAN that is unnoticeable with diagnostic tools like the ones used by high-tech thieves. It also doesn't use a traditional key-fob with LED indicators, meaning it's not visible at sight.

It is possible to disable autowatch ghost immobiliser cost's Ghost 2 automatic protection at times, such as during valet parking or a service job. Ghost CAN immobilisers have a mode called "Service Mode,' which you can activate with just a click of a button on your phone. The car is still operable, but the maximum speed is limited to 36mph.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple process to change the PIN code

Ghost is a next-generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN can be created using buttons on the steering wheel and dash. The device doesn't emit RF signals, therefore it is not able to be tampered with. This makes it impossible to be detected by sophisticated RF scanning and code grabbing technologies used by modern thieves.

The PIN code sequence can be altered whenever you want to lock out previous drivers and even includes an override option in the event of forgotten sequences. When installing, the installer will demonstrate how to do this. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without having to know the pin number. This is a great choice for those who don't want their pin number to be revealed but still want to leave their car with valet parking or service.

In contrast to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons in your vehicle to create an unique and interchangeable PIN code sequence. This sequence is entered using the smartphone app, meaning no extra LED indications are thrown and your car is secure and safe from the possibility of being disabled by hackers or any other technology.

Every vehicle is tested

In contrast to key fobs that require you to press buttons on them and a ghost immobiliser installer immobiliser can be discreetly installed under your steering wheel or dash so that you don't even know it's there. The device is connected to the vehicle's CAN data network, and a personalised PIN code is inserted using buttons that are already present on your vehicle. The system stops your engine from starting unless this code has been entered first. This means that thieves can't copy the keys to your car or use the OBD to hack into it.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, motorhomes and bikes. It's also incredibly versatile and can be programmed to deactivate in various scenarios. It can be programmed to enter Valet mode, for example when the vehicle is transferred to a valet service or parking company. This means that your vehicle can be operated within a set 30mph speed limit, and the ghost immobiliser will reactivate itself once it is returned to your property.

The device can also be reset at anytime to your personal PIN number. This is great in the event that you lose the code, or in the event that the device becomes unusable.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It does this by running through the buttons on your dashboard and steering wheel and then using the information they send in order to determine the exact button that was hit. This makes it a secure and reliable security option that cannot be compromised by jamming, RF scanning or door lock pick sets.